What is fepa and what does it do?

Corundum is the most frequently used abrasive. The purer the corundum, the harder it also is, which can be determined from the colour. The toughness can be increased by adding various metal oxides and by shortening the cooling

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least

Abrasive grains – usually aluminum oxide or silicon carbide Bonding agent – usually a resin bond Spacing of grains within the bond – determine porosity and strength

Around 30 working days after receiving prepayment.

Aluminum Oxide – Aluminum Oxide is brown or reddish in color and a man-made abrasive. It is durable with tough cutting edges. It offers long life and is highly wear resistant even under stress applications. Its applications include

The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best

FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard,

Hardness is rated from A-Z with ‘A’ being the weakest bond and ‘Z’ being the strongest.  A weak bond is preferred for grinding harder materials while  a stronger bond is desired for softer materials.  A typical weak bond

According to the FEPA, the bulk density of an abrasive is the quotient of the mass and the volume a grain type poured out in a particular manner will occupy. The bulk density, also called bulk weight, is

Yes.FREE SAMPLES 5kg can be provided for your evalution.

The description of the grain shape can range from “angular” to “acicular” to “spherical”. When the value of the dimensionless form factor is 1, the grain is spherical. The smaller the form factor, the pointier the grain.

An abrasive’s shape, hardness, and particle size really determine the effectiveness of a MicroBlasting application. Each application is unique, and abrasive selection depends on the composition of the targeted part and the application’s desired result. See our Abrasive Media

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit).  Superfine grits run from 150 and higher.  Grinding wheels usually will be between 24 and 100 grit.  Honing stones and

Our main market include Europe,America,Oceania,Asia.,etc.

If you are roughing, choose a 36 to 80 grit. If you are intermediate grinding, use 80 through 180 grit. If you are finishing, use 220 through 240 grit.

Grit type is either aluminum oxide (white, pink, ruby red, brown, grey, etc.) silicon carbide (black or green), ceramic (blue and pink) or any combination of these. Grit types are sometimes mixed in combination for achieving certain cutting characteristics.