What are the main components used in the construction of bonded abrasives?
Abrasive grains – usually aluminum oxide or silicon carbide Bonding agent – usually a resin bond Spacing of grains within the bond – determine porosity and strength
Dense Fused Alumina for Refractory
Dense Fused Alumina for Refractory is a new high-purity refractory material formed by using high-purity alumina and reducing agents in a specific ratio, smelting in an electric arc furnace and cooled. The main crystal phase is α-Al2O3, and the color is light gray. Dense Fused Alumina for Refractory used dense alumina has a high melting point and a high-volume density, which melted at high temperature and constant temperature in an advanced electric melting tilting furnace. DFA is the ideal material for unshaped and shaped refractories, such as tapping trough of blast furnace, castables for ladle, ramming mix, prefabricated parts, extended nozzle, submerged entry nozzle, stopper, porous brick and nozzle seating brick, etc.
Dense Fused Alumina for Refractory（FAQ）
Can customer ask for the third party certification?
Yes, No problem, but Customer resposiable for the charge.
What is the refractive index of white fused alumina compared with that of glass?
The refractive index of fused alumina is approx. 1.76, whereas that of normal glass types is approx. 1.4. The closer the refractive indices are to each other, the more transparent the system (e.g. varnishes).
What is the best way to store my abrasives?
The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best stored at temperature levels of 60 to 80 degrees Farenheit and a
What does the bulk weight indicate and what impacts the bulk weight?
According to the FEPA, the bulk density of an abrasive is the quotient of the mass and the volume a grain type poured out in a particular manner will occupy. The bulk density, also called bulk weight, is stated in g/cm3. The rounder the particles, the higher the packing density,
How do i prevent moisture contamination in the abrasive?
Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed when not in use.2.Keep abrasive in a cool dry location with minimum
Product Category
Dense Fused Alumina for Refractory News
Product Knowledge
Silicon Carbide And Application Environment-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
The Difference Between Brown Corundum And White Corundum-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Industry News
Refractory Minerals Taken Off US Tariffs List
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Refractory minerals have largely been left off the latest
Use Of Metal Silicon
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Metal silicon, also known as crystalline silicon or industrial
Company News
Taoang Industry – EQUALITY HARMONY PROGRESS
‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,
How is fused alumina obtained?
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,