Bonded Abrasives Manufacturer

Bonded Abrasives are the tools for cutting or grinding. Its composed of abrasive grains held tightly together by the bonding agent. The bonding agents can be resin, rubber, or glass and are typically reinforced by woven material. Bonded abrasives are used for stock removal, grinding, notching, weld blending, cutting, beveling, sharpening, chamfering, and precision finishing. Bonded abrasives come in various grains, grit sizes, bonding compositions, shapes, and sizes to fit many applications.

Filter

Bonded Abrasives FAQ

What is the structure?

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least of which is how difficult the material is to grind.

What is grit size?

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit).  Superfine grits run from 150 and higher.  Grinding wheels usually will be between 24 and 100 grit.  Honing stones and jointing stones and other polishing abrasives will be 150 grit and higher. 

What is the specification?

A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond.  A typical grinding wheel specification would be A60-I10-VS.  ‘A’ is the grit type (aluminum oxide), ’60’ is the grit size, ‘I’ is the relative hardness, ’10’ is the structure, and

Applications
Bonded Abrasives News

The Export Situation Of China Refractories In Q1 2020

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Features of China refractories industry in Q1 2020 1 A

Latest Evolvement On Bauxite And Fused Aluminum Oxide

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. This is the first day of November. In China,

What Are The Raw Materials For Smelting Ferrosilicon

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Ferrosilicon is a combined iron alloy that is used