Paint Additive Manufacturer

In the production of coatings, some additives are often added to increase the performance of coatings. For example, some floor coatings, wear-resistant coatings, and high-temperature resistant coatings. They are commonly used to 100 fine mesh sand and fine powder.

Filter

Paint Additive FAQ

What is melting vs. Sintering?

When processing minerals in a furnace, materials can either be melted or sintered.  When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process creating uniformity in the chemistry throughout the entire batch. The sinerting process

Coarseness of the abrasive mineral:

Commonly referred to as “grit”, this number designation is determined by the amount of abrasive mineral that can pass through a mesh screen with specific size openings. Therefore, a 40 grit abrasive particle will pass through a mesh screen that has 40 openings in one linear inch. Consequently, the higher

What is the specification?

A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond.  A typical grinding wheel specification would be A60-I10-VS.  ‘A’ is the grit type (aluminum oxide), ’60’ is the grit size, ‘I’ is the relative hardness, ’10’ is the structure, and

What is the hardness?

Hardness is rated from A-Z with ‘A’ being the weakest bond and ‘Z’ being the strongest.  A weak bond is preferred for grinding harder materials while  a stronger bond is desired for softer materials.  A typical weak bond for steel would be in the ‘F, G or H’ range.  A

Is sample parts testing available?

MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive once. Abrasive should not be reclaimed and reprocessed for a second pass

Applications
Paint Additive News

Use Of Metal Silicon

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Metal silicon, also known as crystalline silicon or industrial

Brown Fused Aluminum Oxide Applications-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Price Summary For Refractory And Abrasive Materials

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Price summary for refractory and abrasive materialsIn October, the

Refractory Minerals Taken Off US Tariffs List

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Refractory minerals have largely been left off the latest

The Quality Of White Fused Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is