The Influence Of Brown Fused Aluminum Oxide Hydrophilicity After Calcined-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is fully controlled to achieve control of product quality and price.
The Influence Of Brown Fused Aluminum Oxide Hydrophilicity After Calcined
The Influence of Brown Fused Aluminum Oxide hydrophilicity After CalcinedAfter the brown fused Aluminum Oxide abrasive was fired at 800 ° C – 1350 ° C for 2 – 4 hours, the hydrophilic properties of the brown fused Aluminum Oxide abrasive increased by 3.5 times. This is mainly due to the removal of impurities in brown fused Aluminum Oxide abrasive, such as volatiles on the surface of the abrasive, the burning of the low melting point material, and the increase in the capillary phenomenon on the surface of the abrasive. The brown fused Aluminum Oxide abrasive bulk density is correspondingly reduced, the hydrophilicity is improved, and the durability can be improved by 30%.GrainTime(mins)hydrophilic (mm)Before CalcinedAfter Calcined 1503510203049608010312511613919025030060351020304547505250120128157160167
The Influence Of Brown Fused Aluminum Oxide Hydrophilicity After Calcined
TAOANG also expects all viewers to share your insights and look forward to your information.

Product Category
Product Category
Product Knowledge

The Separation of Brown Fused Aluminum Oxide Grits-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Black Silicon Carbide Black Carborundum-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Black Silicon Carbide Use-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Industry News

The Operation Rate Of Fused Alumina Plant In Yichuan

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The Operation Rate of Fused Alumina Plant in Yichuan Affected

Company News

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,