What is the shelf life of fused aluminum oxide?

This is a hard question to answer in a short space.  While the markings mean the wheels should perform the same, differences in factory equipment and marking systems may make one product behave differently than another.  They should

Aluminum Oxide – Aluminum Oxide is brown or reddish in color and a man-made abrasive. It is durable with tough cutting edges. It offers long life and is highly wear resistant even under stress applications. Its applications include

Our main market include Europe,America,Oceania,Asia.,etc.

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,

If you are roughing, choose a 36 to 80 grit. If you are intermediate grinding, use 80 through 180 grit. If you are finishing, use 220 through 240 grit.

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least

Grain – a synthetic or natural abrasive; Bond – an adhesive that permanently bonds the backing to the abrasive; Backing – a backing that the abrasive is bonded to

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

Around 30 working days after receiving prepayment.

Silicon carbide (SiC) is produced from coke and quartz sand applying the Acheson process in an electric resistance furnace. When petrol coke and quartz sand are grouped around a graphite electrode and heated to a temperature of 2,000°C,

Hardness is rated from A-Z with ‘A’ being the weakest bond and ‘Z’ being the strongest.  A weak bond is preferred for grinding harder materials while  a stronger bond is desired for softer materials.  A typical weak bond

Corundum is the most frequently used abrasive. The purer the corundum, the harder it also is, which can be determined from the colour. The toughness can be increased by adding various metal oxides and by shortening the cooling

Yes.FREE SAMPLES 5kg can be provided for your evalution.

When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin

A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond.  A typical grinding wheel specification would be A60-I10-VS.  ‘A’ is the grit type (aluminum oxide), ’60’ is the