Email：[email protected]
Investment mold shell refers to the mold shell for investment casting, also known as wax loss casting, including wax pressing, wax trimming, tree formation, slurry dipping, wax melting, casting liquid metal, and post-treatment. When the mold is lost, the shell will be under the pressure of the increasing volume of molten mold material; During roasting and pouring, each part of the shell will produce mutually restrained and uneven expansion and contraction. Therefore, the metal may also have a high-temperature chemical reaction with the shell material. Therefore, the shell has specific performance requirements, such as low expansion rate and shrinkage rate, High mechanical strength, thermal shock resistance, fire resistance, and chemical stability at high temperatures, so the refractories used in investment casting are mainly quartz and fused alumina.
Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit). Superfine grits run from 150 and higher. Grinding wheels usually will be between 24 and 100 grit. Honing stones and jointing stones and other polishing abrasives will be 150 grit and higher.
Yes.FREE SAMPLES 5kg can be provided for your evalution.
According to the FEPA, the bulk density of an abrasive is the quotient of the mass and the volume a grain type poured out in a particular manner will occupy. The bulk density, also called bulk weight, is stated in g/cm3. The rounder the particles, the higher the packing density,
Mohs hardness (according to Friedrich Mohs, 1773 – 1839) ascribes a relative hardness value to certain known minerals on a scale ranging from 1 (talc) to 10 (diamond). Accordingly, a mineral is considered harder than another if it can scratch the latter. Please note that these values merely form an
The refractive index of fused alumina is approx. 1.76, whereas that of normal glass types is approx. 1.4. The closer the refractive indices are to each other, the more transparent the system (e.g. varnishes).
The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The administrative bureau of Tianjin port has released a
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. In March, on one hand, supply shortage continues for several refractory
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The grinding wheel must be carefully inspected and identified
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. This is the first day of November. In China,