Email：info@taoang.com
Generally, we suggest to make shipment by sea which costs less. We also can follow other transportation method you asked.
Mohs hardness (according to Friedrich Mohs, 1773 – 1839) ascribes a relative hardness value to certain known minerals on a scale ranging from 1 (talc) to 10 (diamond). Accordingly, a mineral is considered harder than another if it
This is a hard question to answer in a short space. While the markings mean the wheels should perform the same, differences in factory equipment and marking systems may make one product behave differently than another. They should
Firstly, We make sure the quality before the goods to be packed, if clients get the item with Substandard products, We have warranty for our clients,we will ship out the new replacements.
FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard,
Dynamic image analysis (DIA) Static light scattering (SLS, also called laser diffraction) Screen analysis Impedance method Sedimentation
Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed
Grit type is either aluminum oxide (white, pink, ruby red, brown, grey, etc.) silicon carbide (black or green), ceramic (blue and pink) or any combination of these. Grit types are sometimes mixed in combination for achieving certain cutting characteristics.
Yes, Sample cost below 5 kgs can be refunded when bulk order confirmed,But freight cost for more than 1kg don’t be refunded.
Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit). Superfine grits run from 150 and higher. Grinding wheels usually will be between 24 and 100 grit. Honing stones and
The refractive index of fused alumina is approx. 1.76, whereas that of normal glass types is approx. 1.4. The closer the refractive indices are to each other, the more transparent the system (e.g. varnishes).
When processing minerals in a furnace, materials can either be melted or sintered. When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process
Silicon carbide is a chemical compound of silicon and carbon and belongs to the group of carbides. The chemical formula is SiC.Silicon carbide is at the same time the hardest and lightest ceramic material and is also highly
Yes. According to NIOSH, Brown Aluminum Oxide could be a viable substitute for consumers looking for safer alternative materials to high crystalline silica content abrasive products.
Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends .on the items and the quantity of your order.
The d50 indicates the mean particle size. d50 means that 50% of particles fall within the specified grain size.
Grain – a synthetic or natural abrasive; Bond – an adhesive that permanently bonds the backing to the abrasive; Backing – a backing that the abrasive is bonded to
fused aluminum oxide products do not have a known shelf life. As long as the product is maintained in the original sealed container and stored in a cool, dry, ventilated area, our product will last indefinitely
An abrasive’s shape, hardness, and particle size really determine the effectiveness of a MicroBlasting application. Each application is unique, and abrasive selection depends on the composition of the targeted part and the application’s desired result. See our Abrasive Media
Porosity is defined as the gas proportion (cavity volume) of a particle’s total volume. It can be determined using different measurement techniques, such as gas adsorption and mercury porosimetry. With the same grain size and shape, a lower
Yeah, we have many stock .Just let us know the products you’d like or interested, then we can sent you the full information of the stock at once.
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Abrasives and refractories industry in centre China province is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. (Briefing message) From Nov 15 to Mar 15,most areas
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. 1. Suitable for low carbon alloy structural steel, especially
Quality is the life of an enterprise, the concentrated expression of an enterprise’s core competitiveness, and an essential determinant of an enterprise’s brand and image. An enterprise’s cultural concept of quality management also reflects the profound ideological content
On February 3, the deputy mayor of Sanmenxia led the comrades in charge of the Municipal Development and Reform Commission, Municipal Finance Bureau, Municipal Industry and Information Bureau, Municipal Ecological Environment Bureau and other relevant departments to go
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,