What is silicon carbide?

Silicon carbide is a chemical compound of silicon and carbon and belongs to the group of carbides. The chemical formula is SiC.Silicon carbide is at the same time the hardest and lightest ceramic material and is also highly resistant against acids and alkaline solutions.

More Questions

Coarseness of the abrasive mineral:

Commonly referred to as “grit”, this number designation is determined by the amount of abrasive mineral that can pass through a mesh screen with specific size openings. Therefore, a 40 grit abrasive particle will pass through a mesh

Are you a manufacturer or trader ?

Yeah, We are the manufacturer of BFA, WFA, GC. Also,we had good business relationship with others abrasive media & refractory raw materials manufacturer . more over we have QC department which make strict inspection on goods quality, packing,

What does the term “flow properties” mean?

The flow behaviour of powders depends on many factors. The following applies in general: Coarser, dry grain types flow easily, but the fine the grains get, the stronger is the impact of morphology and various adhesive forces on

What is your terms of payment?

T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages .before you pay the balance.

What is the specific weight?

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

Amount of abrasive applied:

This decision is made by knowing the type of material you will be working with. Open Coat – Here, the abrasive granules cover from 50% – 70% of the backing and are set at pre-determined spacing to reduce

What is a silane coating used for?

When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin

How do i prevent moisture contamination in the abrasive?

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed

What is the structure?

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least

Why is corundum or silicon carbide used?

Corundum is the most frequently used abrasive. The purer the corundum, the harder it also is, which can be determined from the colour. The toughness can be increased by adding various metal oxides and by shortening the cooling

What is your sample policy?

We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. 

Product Category
Product News
Product Knowledge

Brown Fused Aluminum Oxide – Production Process-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Five Advantages Of Calcined Brown Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Industry News

The Use And Characteristics Of Micro Carbon Ferromanganese

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. 1. Suitable for low carbon alloy structural steel, especially

Company News

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,

Taoang Industry – EQUALITY HARMONY PROGRESS

‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,