Will the same product from two different manufacturers perform the same if they are marked the same?

This is a hard question to answer in a short space. While the markings mean the wheels should perform the same, differences in factory equipment and marking systems may make one product behave differently than another. They should be close, but the only true way to match a product is to have a wheel analysis done by the factory. We do this for no charge and it is recommended for larger purchases to eliminate testing. Note that even when an analysis is done, it is no guarantee the wheels will perform exactly the same.

More Questions

How do i prevent moisture contamination in the abrasive?

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed

What is a mesh vs. Grit size?

If you take a (1) inch space and add wires to it, the number of openings within the 1″ space is defined as mesh. For example, if the 1″ space has ten openings for particles to fall through,

Sample cost is refundable or not?

Yes, Sample cost below 5 kgs can be refunded when bulk order confirmed,But freight cost for more than 1kg don’t be refunded.

What is the warranty policy?

Firstly, We make sure the quality before the goods to be packed, if clients get the item with Substandard products, We have warranty for our clients,we will ship out the new replacements.

What is grit size?

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit). Superfine grits run from 150 and higher. Grinding wheels usually will be between 24 and 100 grit. Honing stones and

Form and shape of the abrasive:

This decision is made by determining how the abrasive will be used by the individual. Abrasives are sold in forms such as sheets, large/small discs, belts, and large/small rolls. Selecting the right form is determined by whether the

What is melting vs. Sintering?

When processing minerals in a furnace, materials can either be melted or sintered. When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process

Can customer ask for the third party certification?

Yes, No problem, but Customer resposiable for the charge.

Are you a manufacturer or trader ?

Yeah, We are the manufacturer of BFA, WFA, GC. Also,we had good business relationship with others abrasive media & refractory raw materials manufacturer . more over we have QC department which make strict inspection on goods quality, packing,

What is your terms of payment?

T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages .before you pay the balance.

What’s payment terms ?

Bank T/T, L/C at sight, Westunion.

What is the specific surface?

The specific surface means the outer surface of a substance including all accessible pores in relation to the mass. It is determined using the Brunauer-Emmett-Teller (BET) method.

Can you produce according to the samples?

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

What is the specific weight?

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

What are the main components used in the construction of bonded abrasives?

Abrasive grains – usually aluminum oxide or silicon carbide Bonding agent – usually a resin bond Spacing of grains within the bond – determine porosity and strength

What does the term “flow properties” mean?

The flow behaviour of powders depends on many factors. The following applies in general: Coarser, dry grain types flow easily, but the fine the grains get, the stronger is the impact of morphology and various adhesive forces on

How long is your delivery time?

Around 30 working days after receiving prepayment.

Which measurement methods are applied?

Dynamic image analysis (DIA) Static light scattering (SLS, also called laser diffraction) Screen analysis Impedance method Sedimentation

Type of glue required:

This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the

What is the best way to store my abrasives?

The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best

Product Category

Product News

What Are The Advantages Of White Fused Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

The Future Development Of Silicon Carbide-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Silicon Carbide And Application Environment-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Factors That Affect Fused Aluminum Oxide Market Price

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Factors That Affect Fused Aluminum Oxide Market PriceChina is

Updates In The Abrasive Industry

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. # Phenolic resin price keeps rising in the domestic

China Refractory Raw Materials In Mar. 2020

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. In March, on one hand, supply shortage continues for several refractory

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,

Strictly control product quality and enhance the core competitiveness of enterprises.

Quality is the life of an enterprise, the concentrated expression of an enterprise’s core competitiveness, and an essential determinant of an enterprise’s brand and image. An enterprise’s cultural concept of quality management also reflects the profound ideological content

Taoang Industry – EQUALITY HARMONY PROGRESS

‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,