Email：[email protected]
Dynamic image analysis (DIA)
Static light scattering (SLS, also called laser diffraction)
Screen analysis
Impedance method
Sedimentation
Yes, No problem, but Customer resposiable for the charge.
Silicon carbide (SiC) is produced from coke and quartz sand applying the Acheson process in an electric resistance furnace. When petrol coke and quartz sand are grouped around a graphite electrode and heated to a temperature of 2,000°C,
Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit). Superfine grits run from 150 and higher. Grinding wheels usually will be between 24 and 100 grit. Honing stones and
The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.
Structure is basically the spacing between abrasive grains. An open structure would be 12 or higher while a closer structure would be 6 or so. Here again, the structure depends on a variety of factors not the least
This is a hard question to answer in a short space. While the markings mean the wheels should perform the same, differences in factory equipment and marking systems may make one product behave differently than another. They should
Porosity is defined as the gas proportion (cavity volume) of a particle’s total volume. It can be determined using different measurement techniques, such as gas adsorption and mercury porosimetry. With the same grain size and shape, a lower
Our main market include Europe,America,Oceania,Asia.,etc.
An abrasive’s shape, hardness, and particle size really determine the effectiveness of a MicroBlasting application. Each application is unique, and abrasive selection depends on the composition of the targeted part and the application’s desired result. See our Abrasive Media
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Bank T/T, L/C at sight, Westunion.
1)for 5~25 tons, it takes around 10~15days. 2)For 26~200 tons,20-40days We will try to deliver it with the promise of quality guarantee as soon as possible
This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the
Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed
Silicon carbide is a chemical compound of silicon and carbon and belongs to the group of carbides. The chemical formula is SiC.Silicon carbide is at the same time the hardest and lightest ceramic material and is also highly
This decision is made by knowing the type of material you will be working with. Open Coat – Here, the abrasive granules cover from 50% – 70% of the backing and are set at pre-determined spacing to reduce
Yeah, we have many stock .Just let us know the products you’d like or interested, then we can sent you the full information of the stock at once.
A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond. A typical grinding wheel specification would be A60-I10-VS. ‘A’ is the grit type (aluminum oxide), ’60’ is the
Grain – a synthetic or natural abrasive; Bond – an adhesive that permanently bonds the backing to the abrasive; Backing – a backing that the abrasive is bonded to
We are a manufacturing and trading combo,produce and export fused alumina for more than 10 years.
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The demolition work of water source enterprises in Yichuan
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. On May 16, an industry source said: “As Zhengzhou
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. This week, due to the continued decline in the
On February 3, the deputy mayor of Sanmenxia led the comrades in charge of the Municipal Development and Reform Commission, Municipal Finance Bureau, Municipal Industry and Information Bureau, Municipal Ecological Environment Bureau and other relevant departments to go
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,
Quality is the life of an enterprise, the concentrated expression of an enterprise’s core competitiveness, and an essential determinant of an enterprise’s brand and image. An enterprise’s cultural concept of quality management also reflects the profound ideological content