What is your terms of payment?

T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages .before you pay the balance.

More Questions

What is the structure?

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least

What does the term “flow properties” mean?

The flow behaviour of powders depends on many factors. The following applies in general: Coarser, dry grain types flow easily, but the fine the grains get, the stronger is the impact of morphology and various adhesive forces on

What is a mesh vs. Grit size?

If you take a (1) inch space and add wires to it, the number of openings within the 1″ space is defined as mesh. For example, if the 1″ space has ten openings for particles to fall through,

Type of glue required:

This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the

How about your delivery time?

Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends .on the items and the quantity of your order.

What is the shelf life of fused aluminum oxide?

fused aluminum oxide products do not have a known shelf life. As long as the product is maintained in the original sealed container and stored in a cool, dry, ventilated area, our product will last indefinitely

Can i get sample in free , how long is the time?

Yes, certainly. We will provide the sample is in free below 5 kgs for free, and the freight cost for free in 1kg. We could arrange the existing samples express delivery immediately. For any special samples requirement, it

What is silicon carbide?

Silicon carbide is a chemical compound of silicon and carbon and belongs to the group of carbides. The chemical formula is SiC.Silicon carbide is at the same time the hardest and lightest ceramic material and is also highly

What is the specific surface?

The specific surface means the outer surface of a substance including all accessible pores in relation to the mass. It is determined using the Brunauer-Emmett-Teller (BET) method.

Why is corundum or silicon carbide used?

Corundum is the most frequently used abrasive. The purer the corundum, the harder it also is, which can be determined from the colour. The toughness can be increased by adding various metal oxides and by shortening the cooling

Is sample parts testing available?

MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive

What is your sample policy?

We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. 

How do i prevent moisture contamination in the abrasive?

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed

What is the d50 value?

The d50 indicates the mean particle size. d50 means that 50% of particles fall within the specified grain size.

Product Category
Product News
Product Knowledge

Acid Washed Brown Fused Aluminum Oxide-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Industry News

Brown Fused Aluminum Oxide Supply in This Week

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. This week, although the price of brown fused Aluminum

China Issued First Environmental Protection Tax Stamp

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The first levy period for China environmental protection tax

The Operation Rate Of Fused Alumina Plant In Yichuan

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The Operation Rate of Fused Alumina Plant in Yichuan Affected

Company News

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,

Taoang Industry – EQUALITY HARMONY PROGRESS

‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,