Email：info@taoang.com
Abrasive grains – usually aluminum oxide or silicon carbide
Bonding agent – usually a resin bond
Spacing of grains within the bond – determine porosity and strength
This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the
Mohs hardness (according to Friedrich Mohs, 1773 – 1839) ascribes a relative hardness value to certain known minerals on a scale ranging from 1 (talc) to 10 (diamond). Accordingly, a mineral is considered harder than another if it
The refractive index of fused alumina is approx. 1.76, whereas that of normal glass types is approx. 1.4. The closer the refractive indices are to each other, the more transparent the system (e.g. varnishes).
The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.
Bank T/T, L/C at sight, Westunion.
Dynamic image analysis (DIA) Static light scattering (SLS, also called laser diffraction) Screen analysis Impedance method Sedimentation
This decision is made by knowing the type of material you will be working with. Open Coat – Here, the abrasive granules cover from 50% – 70% of the backing and are set at pre-determined spacing to reduce
This decision is made by determining how the abrasive will be used by the individual. Abrasives are sold in forms such as sheets, large/small discs, belts, and large/small rolls. Selecting the right form is determined by whether the
Silicon carbide (SiC) is produced from coke and quartz sand applying the Acheson process in an electric resistance furnace. When petrol coke and quartz sand are grouped around a graphite electrode and heated to a temperature of 2,000°C,
The description of the grain shape can range from “angular” to “acicular” to “spherical”. When the value of the dimensionless form factor is 1, the grain is spherical. The smaller the form factor, the pointier the grain.
FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard,
Yes, we have 100% test before delivery
Generally, we suggest to make shipment by sea which costs less. We also can follow other transportation method you asked.
Yes, certainly. We will provide the sample is in free below 5 kgs for free, and the freight cost for free in 1kg. We could arrange the existing samples express delivery immediately. For any special samples requirement, it
Commonly referred to as “grit”, this number designation is determined by the amount of abrasive mineral that can pass through a mesh screen with specific size openings. Therefore, a 40 grit abrasive particle will pass through a mesh
The d50 indicates the mean particle size. d50 means that 50% of particles fall within the specified grain size.
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Around 30 working days after receiving prepayment.
A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond. A typical grinding wheel specification would be A60-I10-VS. ‘A’ is the grit type (aluminum oxide), ’60’ is the
When processing minerals in a furnace, materials can either be melted or sintered. When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Silicon CarbideIn the major production area, the intensified environmental
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. It’s 2nd day we visited the abrasive exhibition, there
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. 1. Suitable for low carbon alloy structural steel, especially
‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
On February 3, the deputy mayor of Sanmenxia led the comrades in charge of the Municipal Development and Reform Commission, Municipal Finance Bureau, Municipal Industry and Information Bureau, Municipal Ecological Environment Bureau and other relevant departments to go