Do you have stock of abrasive media or refractory materials ?

Yeah, we have many stock .Just let us know the products you’d like or interested, then we can sent you the full information of the stock at once.

More Questions

What is the d50 value?

The d50 indicates the mean particle size. d50 means that 50% of particles fall within the specified grain size.

How do i prevent moisture contamination in the abrasive?

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed

What does the form factor (grain shape) indicate?

The description of the grain shape can range from “angular” to “acicular” to “spherical”. When the value of the dimensionless form factor is 1, the grain is spherical. The smaller the form factor, the pointier the grain.

What is silicon carbide?

Silicon carbide is a chemical compound of silicon and carbon and belongs to the group of carbides. The chemical formula is SiC.Silicon carbide is at the same time the hardest and lightest ceramic material and is also highly

How about your delivery time?

Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends .on the items and the quantity of your order.

What is melting vs. Sintering?

When processing minerals in a furnace, materials can either be melted or sintered.  When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process

What is the specification?

A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond.  A typical grinding wheel specification would be A60-I10-VS.  ‘A’ is the grit type (aluminum oxide), ’60’ is the

What is grit size?

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit).  Superfine grits run from 150 and higher.  Grinding wheels usually will be between 24 and 100 grit.  Honing stones and

What is the specific weight?

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

Why is corundum or silicon carbide used?

Corundum is the most frequently used abrasive. The purer the corundum, the harder it also is, which can be determined from the colour. The toughness can be increased by adding various metal oxides and by shortening the cooling

Is sample parts testing available?

MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive

Type of glue required:

This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the

What is the structure?

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least

What is the warranty policy?

Firstly, We make sure the quality before the goods to be packed, if clients get the item with Substandard products, We have warranty for our clients,we will ship out the new replacements.

Product Category
Product News
Product Knowledge

What Is The Difference Between Zirconia And Alumina?-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Storage Of Brown Fused Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Brown Fused Aluminum Oxide Abrasive Grain-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Industry News

Land Freight Goes Up Due To Discriminative Truck Ban

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The administrative bureau of Tianjin port has released a

Land And Maritime Transportation Price Fluctuates

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. (Briefing message) From Nov 15 to Mar 15,most areas

Company News

Taoang Industry – EQUALITY HARMONY PROGRESS

‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,