What is your terms of delivery?
EXW, FOB, CFR, CIF, DDU.
White fused alumina for refractories 5-8mm
White fused alumina for refractories 5-8mm refers to white fused alumina grain with a particle size range of 5mm-8mm. White fused alumina also is known as WFA. It is produced by smelting industry alumina powder in an electric arc furnace at more than 2000°C. Large blocks of white fused alumina produced by the smelting workshop are transported to the section sand production workshop, broken by the coarse crusher, and then screened; finally, White Fused Alumina products with particle sizes within a range of 5-8mm. It is the primary raw material for shaped refractory, unshaped refractory, and other applications.
Introduce white fused alumina for refractories 5-8mm:
White fused alumina is an artificial material made by the fusing process. WFA is a high-grade refractory raw material and a commonly used wear-resistant material. The main crystal phase of fused white alumina is α-Al2O3 (Alpha Aluminum oxide). The colour is white and flawless. The production process of white fused alumina is melting and recrystallizing high-purity industrial alumina powder at temperatures up to 2250 °C.In addition, there are a small number of impurities such as Na2O, SiO2, and Fe2O3 in the alumina powder. In the molten process, sodium oxide and aluminium oxide will generate β-Al2O3 (Na2O·11Al2O3). And it will increase as the content of Na2O increases. β-Al2O3 has a low melting point, low bulk density, and low hardness. When the white fused alumina blocks are cooled and crystallized, β-Al2O3 will precipitate in the upper part of white fused alumina lumps. That will seriously affect the refractory performance and hardness of the white-fused alumina material.
Chemical composite and physical properties of white fused alumina for refractories 5-8mm:
| Items | Grain |
| Al2O3 | 99.3%min |
| SiO2 | 0.10%max |
| Fe2O3 | 0.10%max |
| Na2O | 0.30%max |
| Melting point(℃) | 2250 |
| Real density(g/cm3) | 3.90min |
| Refractoriness （℃） | ≥1900 |
| Colour | White |
| Size | 5mm-8mm |
Product features of white fused alumina for refractories 5-8mm:
- High hardness: Mohs hardness is 9.0, and Vickers hardness(HV) is 2000-2200.
- Good toughness: For example, the compressive strength of white fused alumina F120 is 100KN/cm2.
- High density: The volume density of WFA is 3.6g/cm3.
- High-temperature resistance with low thermal conductivity and low coefficient of linear expansion. So it can resist thermal shock.
- PH value: White fused alumina is a neutral substance with a PH value of 7.0-8.0.
- High resistance to chemical corrosion. White fused alumina is resistant to most acid and alkali materials.
Applications of white fused alumina for refractories 5-8mm:
- Refractory aggregate for ladle in the steel-making industry.
- Kiln construction.
- Furnace building.
- Refractory bricks.
- Ceramic Tiles special ceramics.
- Technical ceramics.
White Fused Alumina（FAQ）
What is the structure?
Structure is basically the spacing between abrasive grains. An open structure would be 12 or higher while a closer structure would be 6 or so. Here again, the structure depends on a variety of factors not the least of which is how difficult the material is to grind.
Which method of transport would be better?
Generally, we suggest to make shipment by sea which costs less. We also can follow other transportation method you asked.
Where’s your main market?
Our main market include Europe,America,Oceania,Asia.,etc.
Can you provide free samples?
Yes.FREE SAMPLES 5kg can be provided for your evalution.
What is the specific weight?
The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.
Product Category
White Fused Alumina Products
White Fused Alumina News
Product Knowledge
Brown Fused Aluminum Oxide Application-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Characteristics Of Alumina Powder-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Industry News
Raw Materials Of Abrasive Price Fluctuation
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. China: Kilns overhaul in Shanxi province is still undergoing.
Brown Fused Aluminum Oxide Face Severe Situation In Henan And Guizhou
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Brown fused Aluminum Oxide face severe situation in Henan
Company News
How is fused alumina obtained?
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,
Taoang Industry – EQUALITY HARMONY PROGRESS
‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,