Email：info@taoang.com
Porosity is defined as the gas proportion (cavity volume) of a particle’s total volume. It can be determined using different measurement techniques, such as gas adsorption and mercury porosimetry.
With the same grain size and shape, a lower bulk density corresponds to a higher porosity of the grains.
Yes.FREE SAMPLES 5kg can be provided for your evalution.
This is a hard question to answer in a short space. While the markings mean the wheels should perform the same, differences in factory equipment and marking systems may make one product behave differently than another. They should
The refractive index of fused alumina is approx. 1.76, whereas that of normal glass types is approx. 1.4. The closer the refractive indices are to each other, the more transparent the system (e.g. varnishes).
Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends .on the items and the quantity of your order.
If you are roughing, choose a 36 to 80 grit. If you are intermediate grinding, use 80 through 180 grit. If you are finishing, use 220 through 240 grit.
This decision is made by determining how the abrasive will be used by the individual. Abrasives are sold in forms such as sheets, large/small discs, belts, and large/small rolls. Selecting the right form is determined by whether the
Aluminum Oxide – Aluminum Oxide is brown or reddish in color and a man-made abrasive. It is durable with tough cutting edges. It offers long life and is highly wear resistant even under stress applications. Its applications include
FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard,
Firstly, We make sure the quality before the goods to be packed, if clients get the item with Substandard products, We have warranty for our clients,we will ship out the new replacements.
The specific surface means the outer surface of a substance including all accessible pores in relation to the mass. It is determined using the Brunauer-Emmett-Teller (BET) method.
When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin
Yes, Sample cost below 5 kgs can be refunded when bulk order confirmed,But freight cost for more than 1kg don’t be refunded.
Yes, No problem, but Customer resposiable for the charge.
Yes, certainly. We will provide the sample is in free below 5 kgs for free, and the freight cost for free in 1kg. We could arrange the existing samples express delivery immediately. For any special samples requirement, it
Yes, we have 100% test before delivery
1)for 5~25 tons, it takes around 10~15days. 2)For 26~200 tons,20-40days We will try to deliver it with the promise of quality guarantee as soon as possible
This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the
An abrasive’s shape, hardness, and particle size really determine the effectiveness of a MicroBlasting application. Each application is unique, and abrasive selection depends on the composition of the targeted part and the application’s desired result. See our Abrasive Media
When processing minerals in a furnace, materials can either be melted or sintered. When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process
Hardness is rated from A-Z with ‘A’ being the weakest bond and ‘Z’ being the strongest. A weak bond is preferred for grinding harder materials while a stronger bond is desired for softer materials. A typical weak bond
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. (Briefing message) From Nov 15 to Mar 15,most areas
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. In Henan -As a matter of fact, calcined bauxite producers
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. In the production process, the diamond grinding wheel is
‘TAOANG’ means ‘Make Waves’ in Chinese, while ‘Promote the truth’ in Taoism. Henan Taoang Industrial was established and developed by the Yellow River, making waves in the industry and promoting the truth in business. TAOANG CORE VALUES: EQUALITY,
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,