Do you test all your goods before delivery?

The description of the grain shape can range from “angular” to “acicular” to “spherical”. When the value of the dimensionless form factor is 1, the grain is spherical. The smaller the form factor, the pointier the grain.

An abrasive’s shape, hardness, and particle size really determine the effectiveness of a MicroBlasting application. Each application is unique, and abrasive selection depends on the composition of the targeted part and the application’s desired result. See our Abrasive Media

MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive

If you are roughing, choose a 36 to 80 grit. If you are intermediate grinding, use 80 through 180 grit. If you are finishing, use 220 through 240 grit.

This is a hard question to answer in a short space.  While the markings mean the wheels should perform the same, differences in factory equipment and marking systems may make one product behave differently than another.  They should

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

According to the FEPA, the bulk density of an abrasive is the quotient of the mass and the volume a grain type poured out in a particular manner will occupy. The bulk density, also called bulk weight, is

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed

A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond.  A typical grinding wheel specification would be A60-I10-VS.  ‘A’ is the grit type (aluminum oxide), ’60’ is the

Our main market include Europe,America,Oceania,Asia.,etc.

Mohs hardness (according to Friedrich Mohs, 1773 – 1839) ascribes a relative hardness value to certain known minerals on a scale ranging from 1 (talc) to 10 (diamond). Accordingly, a mineral is considered harder than another if it

Corundum is a mineral from the category of oxides and hydroxides and is the most frequently used industrial mineral worldwide. It also occurs naturally as a gemstone (sapphire, emerald, ruby). Chemically corundum is aluminium oxide with the chemical

The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best

We are a manufacturing and trading combo,produce and export fused alumina for more than 10 years.