What is melting vs. Sintering?

According to the FEPA, the bulk density of an abrasive is the quotient of the mass and the volume a grain type poured out in a particular manner will occupy. The bulk density, also called bulk weight, is

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

Structure is basically the spacing between abrasive grains.  An open structure would be 12 or higher while a closer structure would be 6 or so.  Here again, the structure depends on a variety of factors not the least

We are a manufacturing and trading combo,produce and export fused alumina for more than 10 years.

When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin

The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best

If you are roughing, choose a 36 to 80 grit. If you are intermediate grinding, use 80 through 180 grit. If you are finishing, use 220 through 240 grit.

Silicon carbide is a chemical compound of silicon and carbon and belongs to the group of carbides. The chemical formula is SiC.Silicon carbide is at the same time the hardest and lightest ceramic material and is also highly

Aluminum Oxide – Aluminum Oxide is brown or reddish in color and a man-made abrasive. It is durable with tough cutting edges. It offers long life and is highly wear resistant even under stress applications. Its applications include

Dynamic image analysis (DIA) Static light scattering (SLS, also called laser diffraction) Screen analysis Impedance method Sedimentation