What are the main components used in the construction of bonded abrasives?
Abrasive grains – usually aluminum oxide or silicon carbide Bonding agent – usually a resin bond Spacing of grains within the bond – determine porosity and strength
Graded Bubble Alumina
The particle size of graded bubble alumina mainly includes: 0.1-0.2mm, 0.2-0.5mm, 0.2-1mm, 0.5-1mm, 1-2mm, 2-3mm and 3-5mm. The mixed bubble alumina is further screened out into several particle sizes ranges through the screen to get graded bubble alumina.
Graded Bubble Alumina（FAQ）
Type of glue required:
This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the backing. Referred to as “Glue Bond”. Resin – A synthetic resin that
What is melting vs. Sintering?
When processing minerals in a furnace, materials can either be melted or sintered. When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process creating uniformity in the chemistry throughout the entire batch. The sinerting process
What is the structure?
Structure is basically the spacing between abrasive grains. An open structure would be 12 or higher while a closer structure would be 6 or so. Here again, the structure depends on a variety of factors not the least of which is how difficult the material is to grind.
Is sample parts testing available?
MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive once. Abrasive should not be reclaimed and reprocessed for a second pass
What’s lead time for bulk order?
1)for 5~25 tons, it takes around 10~15days. 2)For 26~200 tons,20-40days We will try to deliver it with the promise of quality guarantee as soon as possible
Product Category
Graded Bubble Alumina News
Product Knowledge
Brown Fused Aluminum Oxide Application-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
The Difference Between Brown Corundum And White Corundum-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Industry News
Refractory Minerals Taken Off US Tariffs List
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Refractory minerals have largely been left off the latest
Abrasive Grains D Wheels Show
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. It’s 2nd day we visited the abrasive exhibition, there
Company News
How is fused alumina obtained?
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,
Strictly control product quality and enhance the core competitiveness of enterprises.
Quality is the life of an enterprise, the concentrated expression of an enterprise’s core competitiveness, and an essential determinant of an enterprise’s brand and image. An enterprise’s cultural concept of quality management also reflects the profound ideological content