Fused Alumina Manufacturer

MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive once. Abrasive should not be reclaimed and reprocessed for a second pass

Yes.FREE SAMPLES 5kg can be provided for your evalution.

Corundum is a mineral from the category of oxides and hydroxides and is the most frequently used industrial mineral worldwide. It also occurs naturally as a gemstone (sapphire, emerald, ruby). Chemically corundum is aluminium oxide with the chemical formula Al2O3.

The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best stored at temperature levels of 60 to 80 degrees Farenheit and a

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit).  Superfine grits run from 150 and higher.  Grinding wheels usually will be between 24 and 100 grit.  Honing stones and jointing stones and other polishing abrasives will be 150 grit and higher. 

Hardness is rated from A-Z with ‘A’ being the weakest bond and ‘Z’ being the strongest.  A weak bond is preferred for grinding harder materials while  a stronger bond is desired for softer materials.  A typical weak bond for steel would be in the ‘F, G or H’ range.  A