Shaped Refractory Manufacturer

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance, bauxite is used for the manufacture of brown and semi-friable fused alumina,

The flow behaviour of powders depends on many factors. The following applies in general: Coarser, dry grain types flow easily, but the fine the grains get, the stronger is the impact of morphology and various adhesive forces on the flow behaviour: Van der Waals forces Liquid bridges Electrostatic interaction The

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed when not in use.2.Keep abrasive in a cool dry location with minimum

MicroBlasting is extremely efficient and precise, so it is hardly likely you will need to recycle abrasive, but it is important to know the risk involved. Unlike grit or bead blasting, a MicroBlasting system can only cycle abrasive once. Abrasive should not be reclaimed and reprocessed for a second pass