Email：info@taoang.com
A polishing powder consists of very fine abrasive grains that, when applied through buffing, create a high gloss. The partnership between the buffing pad on an orbital buffer and the dampened powder created the catalyst for a shine.
FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard, among other things. This is to ensure that a consistent quality for
This decision is made by knowing the type of material you will be working with. Open Coat – Here, the abrasive granules cover from 50% – 70% of the backing and are set at pre-determined spacing to reduce loading. Used on softer surface materials that tends to load or fill
Dynamic image analysis (DIA) Static light scattering (SLS, also called laser diffraction) Screen analysis Impedance method Sedimentation
Glue – A system where both coats are made of animal glue is used when the strength of the bond is not an important factor, such as with lightweight papers and materials. Phenolic Resin – This system uses full phenolic resin for both coats. It is designed to withstand moisture
Hardness is rated from A-Z with ‘A’ being the weakest bond and ‘Z’ being the strongest. A weak bond is preferred for grinding harder materials while a stronger bond is desired for softer materials. A typical weak bond for steel would be in the ‘F, G or H’ range. A
Silicon carbide (SiC) is produced from coke and quartz sand applying the Acheson process in an electric resistance furnace. When petrol coke and quartz sand are grouped around a graphite electrode and heated to a temperature of 2,000°C, black and slightly higher-quality green SiC are obtained. Green SiC has a
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The price of raw materials has skyrocketed. According to
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. In September, the market supply off brown fused Aluminum
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The administrative bureau of Tianjin port has released a
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Sources from market have evidenced the WFA price slipped
