Email：info@taoang.com
Plastic refractory is a kind of monolithic refractory made up of granular and powdery materials and plastic clay and then add a small amount of water after a hard mud paste mix that maintains high plasticity for a long time in the shape of the unshaped refractory. Plastic refractory consists of 70% to 80% granular and powdery materials and 10% to 25% plastic clay and plasticizers. Plastic refractory is usually used in heating furnaces, soaking furnaces, annealing, sintering, and electric furnace roof in the iron and steel industry. Plastic refractory for a boiler is typical for the construction of boiler combustion chambers because of the properties of plastic refractory. Plastic refractory has good wear resistance, high structural strength, good thermal shock stability, and easy construction.
FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard, among other things. This is to ensure that a consistent quality for
Yes, we have 100% test before delivery
If you are roughing, choose a 36 to 80 grit. If you are intermediate grinding, use 80 through 180 grit. If you are finishing, use 220 through 240 grit.
Al2O3 alumina is the starting material of aluminium production, both of metallic aluminium and aluminium oxide. It is porous an has a large reactive surface.
The description of the grain shape can range from “angular” to “acicular” to “spherical”. When the value of the dimensionless form factor is 1, the grain is spherical. The smaller the form factor, the pointier the grain.
Yes, certainly. We will provide the sample is in free below 5 kgs for free, and the freight cost for free in 1kg. We could arrange the existing samples express delivery immediately. For any special samples requirement, it need max 7 days finished. Usually we send samples by TNT ,FEDEX,
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. (Briefing message) From Nov 15 to Mar 15,most areas
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. China-US Refractory MaterialTradeAs one of the most important business
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The resin binder is an organic binder. The binder
On February 3, the deputy mayor of Sanmenxia led the comrades in charge of the Municipal Development and Reform Commission, Municipal Finance Bureau, Municipal Industry and Information Bureau, Municipal Ecological Environment Bureau and other relevant departments to go