Email：info@taoang.com
FEPA-F, There are multiple standard versions for grain sizes. The European FEPA (Federation of European Producers of Abrasives). Within the FEPA sizes, you can also distinguish between FEPA-P and FEPA-F. F sand is an applied particle size specification for abrasives and refractory materials. The particle size numbers are: F4, F5, F6, F7, F8, F10, F12, F14, F16, F20, F22, F24, F30, f36, F40, F46, f54, F60, F70, F80, f90, F100, F120, F150, F180, F220, F220, F230, F240, f280, F320, F320, f280, F320, F320, f280, F320, F360, F400, F600, F800, F1000, f1200. Among them, f4-f220 is called “grit size,” which is produced by screening, and f230-f1200 is called “micro powder,” which is produced by multi-purpose water separation, airflow and ultrasonic circular vibrating screen
Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance, bauxite is used for the manufacture of brown and semi-friable fused alumina,
Commonly referred to as “grit”, this number designation is determined by the amount of abrasive mineral that can pass through a mesh screen with specific size openings. Therefore, a 40 grit abrasive particle will pass through a mesh screen that has 40 openings in one linear inch. Consequently, the higher
Corundum is a mineral from the category of oxides and hydroxides and is the most frequently used industrial mineral worldwide. It also occurs naturally as a gemstone (sapphire, emerald, ruby). Chemically corundum is aluminium oxide with the chemical formula Al2O3.
The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best stored at temperature levels of 60 to 80 degrees Farenheit and a
This decision is made by determining how the abrasive will be used by the individual. Abrasives are sold in forms such as sheets, large/small discs, belts, and large/small rolls. Selecting the right form is determined by whether the abrasive will be used for hand. sanding, applied to a large disc
This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the backing. Referred to as “Glue Bond”. Resin – A synthetic resin that
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Silicon germanium inoculants are mostly used for thin-walled and
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The resin grinding wheel is a grinding wheel made
