Abrasive Disc Manufacturer

The abrasive discs are used grains of natural or synthetic abrasive materials, joined together by a binding agent and fixed to a support material. Abrasive discs are used to cut, rough or sand any material through friction. Its design, shape and composition will vary according to the use given. The use of abrasive discs in the steel industry is widespread: from the manufacturing of household or industry equipment, components for construction sectors, metal profiles, and pipes to the maintenance and repair of equipment, tools and machines.

Filter

Abrasive Disc FAQ

What is porosity?

Porosity is defined as the gas proportion (cavity volume) of a particle’s total volume. It can be determined using different measurement techniques, such as gas adsorption and mercury porosimetry. With the same grain size and shape, a lower bulk density corresponds to a higher porosity of the grains.

Coarseness of the abrasive mineral:

Commonly referred to as “grit”, this number designation is determined by the amount of abrasive mineral that can pass through a mesh screen with specific size openings. Therefore, a 40 grit abrasive particle will pass through a mesh screen that has 40 openings in one linear inch. Consequently, the higher

What is the specific weight?

The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.

What is grit size?

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit).  Superfine grits run from 150 and higher.  Grinding wheels usually will be between 24 and 100 grit.  Honing stones and jointing stones and other polishing abrasives will be 150 grit and higher. 

Applications
Abrasive Disc News

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,

Brown Fused Aluminum Oxide-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Ceramic Abrasive Grain-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is