Email：[email protected]
This decision is made by the type of abrasive you have selected or the type of process you will be performing.
Glue – A straight animal hide glue that is used to adhere the abrasive particles to the backing. Referred to as “Glue Bond”.
Resin – A synthetic resin that is used to adhere the abrasive particles to the backing. This type of bond is resistant to heat and moisture and is referred to as “Resin Bond”.
Around 30 working days after receiving prepayment.
Yes, Sample cost below 5 kgs can be refunded when bulk order confirmed,But freight cost for more than 1kg don’t be refunded.
Generally, we suggest to make shipment by sea which costs less. We also can follow other transportation method you asked.
FEPA is the Federation of European Producers of Abrasives. Its mission is to develop and publish standards, documents and comprehensive safety instructions for the abrasive industry. Abrasive grain sizes are produced and sold according to the FEPA standard,
The specific weight is the ratio of the weight of a body to its volume. The specific weight of corundum under normal conditions is 3.94 g/cm3.
The d50 indicates the mean particle size. d50 means that 50% of particles fall within the specified grain size.
EXW, FOB, CFR, CIF, DDU.
Corundum is a mineral from the category of oxides and hydroxides and is the most frequently used industrial mineral worldwide. It also occurs naturally as a gemstone (sapphire, emerald, ruby). Chemically corundum is aluminium oxide with the chemical
Glue – A system where both coats are made of animal glue is used when the strength of the bond is not an important factor, such as with lightweight papers and materials. Phenolic Resin – This system uses
Mohs hardness (according to Friedrich Mohs, 1773 – 1839) ascribes a relative hardness value to certain known minerals on a scale ranging from 1 (talc) to 10 (diamond). Accordingly, a mineral is considered harder than another if it
Yeah, we have many stock .Just let us know the products you’d like or interested, then we can sent you the full information of the stock at once.
Corundum is the most frequently used abrasive. The purer the corundum, the harder it also is, which can be determined from the colour. The toughness can be increased by adding various metal oxides and by shortening the cooling
The refractive index of fused alumina is approx. 1.76, whereas that of normal glass types is approx. 1.4. The closer the refractive indices are to each other, the more transparent the system (e.g. varnishes).
T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages .before you pay the balance.
Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends .on the items and the quantity of your order.
Yes, No problem, but Customer resposiable for the charge.
Silicon carbide (SiC) is produced from coke and quartz sand applying the Acheson process in an electric resistance furnace. When petrol coke and quartz sand are grouped around a graphite electrode and heated to a temperature of 2,000°C,
Porosity is defined as the gas proportion (cavity volume) of a particle’s total volume. It can be determined using different measurement techniques, such as gas adsorption and mercury porosimetry. With the same grain size and shape, a lower
This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the
When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. The administrative bureau of Tianjin port has released a
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. 2020 started with an unfavorable beginning to Chinese suppliers
Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Abrasives and refractories industry in centre China province is
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is
On February 3, the deputy mayor of Sanmenxia led the comrades in charge of the Municipal Development and Reform Commission, Municipal Finance Bureau, Municipal Industry and Information Bureau, Municipal Ecological Environment Bureau and other relevant departments to go
Quality is the life of an enterprise, the concentrated expression of an enterprise’s core competitiveness, and an essential determinant of an enterprise’s brand and image. An enterprise’s cultural concept of quality management also reflects the profound ideological content