Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. 1. The actual line speed of the grinding wheel shall not exceed the requirements of the following table.2. The grinding wheel should check the speed mark of the grinding wheel before installation, and then check whether there are cracks and damage, and the strength test is needed.3. After the installation of the grinding wheel, it must be idling for not less than 5 minutes with the protective cover. Only when it is sure that the grinding wheel has reliable strength can it start working.4. It is forbidden to use coolant that has a destructive effect on the grinding wheel binder.5. When handling the grinding wheel, it is necessary to prevent severe vibration and impact.6. Depending on the size and shape of the grinding wheel, it should be placed on the shelf and in the box.7. The grinding wheel should be stored to prevent moisture and freezing.8. The storage period of the resin bond grinding wheel shall not exceed one year. If it is overdue, it must be strictly checked to confirm that the quality is no problem before it can be used. TAOANG also expects all viewers to share your insights and look forward to your information.
The Green Production Of Silicon Carbide Powder-TAOANG
Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is