How long is your delivery time?

Around 30 working days after receiving prepayment.

More Questions

What is corundum?

Corundum is a mineral from the category of oxides and hydroxides and is the most frequently used industrial mineral worldwide. It also occurs naturally as a gemstone (sapphire, emerald, ruby). Chemically corundum is aluminium oxide with the chemical

How is silicon carbide obtained?

Silicon carbide (SiC) is produced from coke and quartz sand applying the Acheson process in an electric resistance furnace. When petrol coke and quartz sand are grouped around a graphite electrode and heated to a temperature of 2,000°C,

What is porosity?

Porosity is defined as the gas proportion (cavity volume) of a particle’s total volume. It can be determined using different measurement techniques, such as gas adsorption and mercury porosimetry. With the same grain size and shape, a lower

Form and shape of the abrasive:

This decision is made by determining how the abrasive will be used by the individual. Abrasives are sold in forms such as sheets, large/small discs, belts, and large/small rolls. Selecting the right form is determined by whether the

What is melting vs. Sintering?

When processing minerals in a furnace, materials can either be melted or sintered.  When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process

Amount of abrasive applied:

This decision is made by knowing the type of material you will be working with. Open Coat – Here, the abrasive granules cover from 50% – 70% of the backing and are set at pre-determined spacing to reduce

What is a silane coating used for?

When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin

What is your terms of payment?

T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages .before you pay the balance.

What is the best way to store my abrasives?

The best way to have abrasive products retain maximum performance and work life is to store them properly. The bonding and backing materials used in abrasives are very sensitive to changes in temperature and humidity. Abrasives are best

Coarseness of the abrasive mineral:

Commonly referred to as “grit”, this number designation is determined by the amount of abrasive mineral that can pass through a mesh screen with specific size openings. Therefore, a 40 grit abrasive particle will pass through a mesh

Are you a manufacturer or trader ?

Yeah, We are the manufacturer of BFA, WFA, GC. Also,we had good business relationship with others abrasive media & refractory raw materials manufacturer . more over we have QC department which make strict inspection on goods quality, packing,

What is a mesh vs. Grit size?

If you take a (1) inch space and add wires to it, the number of openings within the 1″ space is defined as mesh. For example, if the 1″ space has ten openings for particles to fall through,

What does the form factor (grain shape) indicate?

The description of the grain shape can range from “angular” to “acicular” to “spherical”. When the value of the dimensionless form factor is 1, the grain is spherical. The smaller the form factor, the pointier the grain.

Product Category
Product News
Product Knowledge

What Are The Advantages Of White Fused Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

The Quality Of White Fused Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

The Difference Between Zinc Shot And Aluminum Shot-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Industry News
Company News