How do i prevent moisture contamination in the abrasive?

Moisture contamination is the number one reason customers call Technical Support. Fortunately, it is usually preventable. There are 4 key ways to keep your abrasive free of moisture:1.Store abrasive properly and always make sure bottles are tightly closed when not in use.2.Keep abrasive in a cool dry location with minimum temperature fluctuations.3.Do not leave abrasive in the blaster’s tank for extended periods of time.4.Keep the air supply dry.

More Questions

How do i know what abrasive is best for my application?

An abrasive’s shape, hardness, and particle size really determine the effectiveness of a MicroBlasting application. Each application is unique, and abrasive selection depends on the composition of the targeted part and the application’s desired result. See our Abrasive Media

What is the specific surface?

The specific surface means the outer surface of a substance including all accessible pores in relation to the mass. It is determined using the Brunauer-Emmett-Teller (BET) method.

How about your delivery time?

Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends .on the items and the quantity of your order.

What is your terms of payment?

T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages .before you pay the balance.

What is grit size?

Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit).  Superfine grits run from 150 and higher.  Grinding wheels usually will be between 24 and 100 grit.  Honing stones and

What is melting vs. Sintering?

When processing minerals in a furnace, materials can either be melted or sintered.  When materials are melted during the production process the minerals go from a solid state, to a liquid state, then is re-solidified during the cooling process

What is your sample policy?

We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. 

What is the grit type?

Grit type is either aluminum oxide (white, pink, ruby red, brown, grey, etc.) silicon carbide (black or green), ceramic (blue and pink) or any combination of these. Grit types are sometimes mixed in combination for achieving certain cutting characteristics. 

What does the term “flow properties” mean?

The flow behaviour of powders depends on many factors. The following applies in general: Coarser, dry grain types flow easily, but the fine the grains get, the stronger is the impact of morphology and various adhesive forces on

Type of glue required:

This decision is made by the type of abrasive you have selected or the type of process you will be performing. Glue – A straight animal hide glue that is used to adhere the abrasive particles to the

What is a mesh vs. Grit size?

If you take a (1) inch space and add wires to it, the number of openings within the 1″ space is defined as mesh. For example, if the 1″ space has ten openings for particles to fall through,

What is a silane coating used for?

When functionalising fused alumina, a very thin layer of a silane adsorption group is applied to the fused alumina particles. This organic surface coating has the effect of better embedding and increased scratch resistance in a melamine resin

How is fused alumina obtained?

Raw materials containing aluminium oxide are electrothermally melted at a reaction temperature of more than 2,000 °C to produce the various fused aluminas. Different starting materials are used depending on the desired type of fused alumina. For instance,

Amount of abrasive applied:

This decision is made by knowing the type of material you will be working with. Open Coat – Here, the abrasive granules cover from 50% – 70% of the backing and are set at pre-determined spacing to reduce

What is the specification?

A typical grinding wheel specification consists of the grit type, the grit size, the hardness, the structure and the bond.  A typical grinding wheel specification would be A60-I10-VS.  ‘A’ is the grit type (aluminum oxide), ’60’ is the

What is the warranty policy?

Firstly, We make sure the quality before the goods to be packed, if clients get the item with Substandard products, We have warranty for our clients,we will ship out the new replacements.

Product Category
Product News
Product Knowledge

The Quality Of White Fused Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

The Energy Consumption Of Brown Alumina-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Green Silicon Carbide, Carborundum-TAOANG

Over the past 18 years, TAOANG products range from raw material bauxite to processing follow-up products brown fused alumina, finishing white fused alumina and dense fused alumina, bubble alumina, and fused alumina micro powder. The production process is

Industry News

How To Use The Recarburizer Correctly

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. A recarburizer is an auxiliary additive. So how can

Market Review On China Refractory Raw Materials In September

Fused Alumina is the tooth of industry and is widely used in various industries. TAOANG is committed to sharing information on the upstream and downstream industries of fused alumina. Market review on China refractory raw materials in September In

Company News